All Stone Facades All Stone Facades

Search

NewsMaintenance & Care

Caring for Natural Stone Floors: A Practical Guide

A natural stone floor can last for generations with the right care. From everyday cleaning to stains, sealing and wear, here is what really works.

Photo by Magda Ehlers on Pexels
In this article

A natural stone floor is one of the most durable finishes you can choose. Stone floors laid centuries ago are still in daily use in churches, country houses and town halls across Britain. But durability is not the same as indestructibility, and the difference between a floor that improves with age and one that looks tired within a few years is usually down to how it is cared for.

The good news is that caring for stone is simple once you understand a few basic principles.

Know your stone

The single most useful thing to know is what kind of stone you have, because it determines which products are safe to use.

  • Calcareous stones — marble and limestone, including Portland stone — are made largely of calcium carbonate. They react with acids, so vinegar, lemon juice, wine, fruit juice and many bathroom cleaners will etch the surface, leaving dull marks.
  • Siliceous stones — granite and slate — are generally far more resistant to acids, although they can still stain and some are sensitive to strong alkaline products.

If you are not sure what your floor is, check your handover documents or ask the installer. When in doubt, treat the floor as if it were marble: gentle, pH-neutral care is safe for almost every natural stone.

Everyday cleaning

Grit is the main enemy of a stone floor. Sand and dust carried in on shoes act like sandpaper, gradually dulling the surface, especially in doorways and walkways. Regular dry cleaning does more to preserve a floor than any product.

  1. Remove grit first. Use a soft brush, a vacuum with a hard-floor head (not a beater bar) or a dry microfibre mop.
  2. Damp-mop with a pH-neutral stone cleaner. Dilute it as directed in clean, warm water. Change the water frequently so you are not spreading dirt around.
  3. Dry the floor. Buffing with a clean, dry microfibre cloth or mop prevents water marks, particularly on polished stone.

Avoid general-purpose household cleaners, bleach, ammonia, descalers and anything containing vinegar or citrus. Washing-up liquid can leave a sticky film that attracts dirt. Steam cleaners are best avoided unless the manufacturer of your sealer confirms they are safe, as the heat and moisture can break down protective treatments.

Dealing with spills and stains

Most stains can be prevented if spills are dealt with quickly. Blot, rather than wipe, to avoid spreading the liquid, then rinse the area with clean water and dry it.

Different stains need different approaches:

  • Oil and grease — cooking oil, cosmetics and butter darken the stone. A specialist poultice can draw the oil back out over a day or two.
  • Organic stains — tea, coffee, wine and leaves leave brown or pink marks. These often fade with time and light, and can be lifted with appropriate stone-safe products.
  • Etch marks — dull spots on marble or limestone are not stains but damage to the surface. They cannot be cleaned away, but they can be honed out by a professional.
  • Rust — caused by metal furniture feet or plant pots. Rust stains need specialist treatment and are best tackled by a professional.

Always test any stain treatment on a hidden area first, and never scrub with abrasive pads, which can permanently scratch the surface.

Sealing: what it does and does not do

Most natural stone floors are protected with an impregnating sealer, which soaks into the stone and lines its pores. It reduces how quickly liquids are absorbed, giving you time to clean up a spill before it stains. It does not make the stone completely stain-proof, and it does not protect against etching from acids.

Impregnating sealers are usually invisible and allow the stone to breathe. Topical coatings, which form a film on the surface, are generally not recommended for natural stone floors because they wear unevenly, can trap moisture and are difficult to remove.

A simple test: drip a little water onto the floor in a busy area. If it still beads after several minutes, the sealer is working. If it soaks in and darkens the stone quickly, it is time to reseal.

How often a floor needs resealing depends on the stone, the sealer and how much traffic the floor receives. Kitchens and entrance halls need attention sooner than bedrooms or formal rooms.

Preventing scratches and wear

  • Use good-quality entrance matting inside and outside external doors to trap grit.
  • Fit felt pads to chair and table legs, and lift furniture rather than dragging it.
  • Use rugs with breathable, non-staining backings in heavily used areas.
  • Place saucers under plant pots, and avoid metal feet that can rust.

Stone floors and underfloor heating

Stone and underfloor heating are an excellent combination, but sudden temperature changes place stress on the floor. Bring heating up and down gradually, particularly at the start of the heating season, and follow the system installer's guidance on maximum floor temperatures. Keep rugs thin over heated areas so heat is not trapped beneath them.

When to call in a professional

Routine care keeps a stone floor looking good for many years, but eventually most floors benefit from professional attention. Signs that it may be time include:

  • a dull, worn path through the main walkways;
  • widespread etching or scratches;
  • uneven edges between tiles, known as lippage;
  • cracked or loose tiles, or grout that is cracked, missing or permanently stained;
  • water soaking straight into the stone.

Professional restoration can include deep cleaning, grinding out lippage, honing to remove scratches and etch marks, polishing, re-grouting and resealing. In most cases the result is a floor that looks as good as new — without the cost, dust and disruption of replacing it. Our cleaning and restoration team can assess your floor and recommend the right level of work, or you can contact us for advice on caring for a newly installed floor.

Keep reading

Work with us

Planning a natural stone project?

Talk to our specialists about façades, floors, tiling or restoration — we will help you plan it properly from the very start.